{-|

This module defines a generic web application interface. It is a common
protocol between web servers and web applications.

The overriding design principles here are performance and generality. To
address performance, this library uses a streaming interface for request and
response bodies, paired with bytestring's 'Builder' type.  The advantages of a
streaming API over lazy IO have been debated elsewhere and so will not be
addressed here.  However, helper functions like 'responseLBS' allow you to
continue using lazy IO if you so desire.

Generality is achieved by removing many variables commonly found in similar
projects that are not universal to all servers. The goal is that the 'Request'
object contains only data which is meaningful in all circumstances.

Please remember when using this package that, while your application may
compile without a hitch against many different servers, there are other
considerations to be taken when moving to a new backend. For example, if you
transfer from a CGI application to a FastCGI one, you might suddenly find you
have a memory leak. Conversely, a FastCGI application would be well served to
preload all templates from disk when first starting; this would kill the
performance of a CGI application.

This package purposely provides very little functionality. You can find various
middlewares, backends and utilities on Hackage. Some of the most commonly used
include:

[warp] <http://hackage.haskell.org/package/warp>

[wai-extra] <http://hackage.haskell.org/package/wai-extra>

-}
-- Ignore deprecations, because this module needs to use the deprecated requestBody to construct a response.
{-# OPTIONS_GHC -fno-warn-deprecations #-}
module Network.Wai
    (
      -- * Types
      Application
    , Middleware
    , ResponseReceived
      -- * Request
    , Request
    , defaultRequest
    , RequestBodyLength (..)
      -- ** Request accessors
    , requestMethod
    , httpVersion
    , rawPathInfo
    , rawQueryString
    , requestHeaders
    , isSecure
    , remoteHost
    , pathInfo
    , queryString
    , getRequestBodyChunk
    , requestBody
    , vault
    , requestBodyLength
    , requestHeaderHost
    , requestHeaderRange
    , requestHeaderReferer
    , requestHeaderUserAgent
    -- $streamingRequestBodies
    , strictRequestBody
    , consumeRequestBodyStrict
    , lazyRequestBody
    , consumeRequestBodyLazy
      -- * Response
    , Response
    , StreamingBody
    , FilePart (..)
      -- ** Response composers
    , responseFile
    , responseBuilder
    , responseLBS
    , responseStream
    , responseRaw
      -- ** Response accessors
    , responseStatus
    , responseHeaders
      -- ** Response modifiers
    , responseToStream
    , mapResponseHeaders
    , mapResponseStatus
      -- * Middleware composition
    , ifRequest
    , modifyResponse
    ) where

import           Data.ByteString.Builder      (Builder, lazyByteString)
import           Data.ByteString.Builder      (byteString)
import           Control.Monad                (unless)
import qualified Data.ByteString              as B
import qualified Data.ByteString.Lazy         as L
import qualified Data.ByteString.Lazy.Internal as LI
import           Data.ByteString.Lazy.Internal (defaultChunkSize)
import           Data.ByteString.Lazy.Char8   ()
import           Data.Function                (fix)
import qualified Network.HTTP.Types           as H
import           Network.Socket               (SockAddr (SockAddrInet))
import           Network.Wai.Internal
import qualified System.IO                    as IO
import           System.IO.Unsafe             (unsafeInterleaveIO)

----------------------------------------------------------------

-- | Creating 'Response' from a file.
responseFile :: H.Status -> H.ResponseHeaders -> FilePath -> Maybe FilePart -> Response
responseFile :: Status -> ResponseHeaders -> FilePath -> Maybe FilePart -> Response
responseFile = Status -> ResponseHeaders -> FilePath -> Maybe FilePart -> Response
ResponseFile

-- | Creating 'Response' from 'Builder'.
--
-- Some questions and answers about the usage of 'Builder' here:
--
-- Q1. Shouldn't it be at the user's discretion to use Builders internally and
-- then create a stream of ByteStrings?
--
-- A1. That would be less efficient, as we wouldn't get cheap concatenation
-- with the response headers.
--
-- Q2. Isn't it really inefficient to convert from ByteString to Builder, and
-- then right back to ByteString?
--
-- A2. No. If the ByteStrings are small, then they will be copied into a larger
-- buffer, which should be a performance gain overall (less system calls). If
-- they are already large, then an insert operation is used
-- to avoid copying.
--
-- Q3. Doesn't this prevent us from creating comet-style servers, since data
-- will be cached?
--
-- A3. You can force a Builder to output a ByteString before it is an
-- optimal size by sending a flush command.
responseBuilder :: H.Status -> H.ResponseHeaders -> Builder -> Response
responseBuilder :: Status -> ResponseHeaders -> Builder -> Response
responseBuilder = Status -> ResponseHeaders -> Builder -> Response
ResponseBuilder

-- | Creating 'Response' from 'L.ByteString'. This is a wrapper for
--   'responseBuilder'.
responseLBS :: H.Status -> H.ResponseHeaders -> L.ByteString -> Response
responseLBS :: Status -> ResponseHeaders -> ByteString -> Response
responseLBS Status
s ResponseHeaders
h = Status -> ResponseHeaders -> Builder -> Response
ResponseBuilder Status
s ResponseHeaders
h (Builder -> Response)
-> (ByteString -> Builder) -> ByteString -> Response
forall b c a. (b -> c) -> (a -> b) -> a -> c
. ByteString -> Builder
lazyByteString

-- | Creating 'Response' from a stream of values.
--
-- In order to allocate resources in an exception-safe manner, you can use the
-- @bracket@ pattern outside of the call to @responseStream@. As a trivial
-- example:
--
-- @
-- app :: Application
-- app req respond = bracket_
--     (putStrLn \"Allocating scarce resource\")
--     (putStrLn \"Cleaning up\")
--     $ respond $ responseStream status200 [] $ \\write flush -> do
--         write $ byteString \"Hello\\n\"
--         flush
--         write $ byteString \"World\\n\"
-- @
--
-- Note that in some cases you can use @bracket@ from inside @responseStream@
-- as well. However, placing the call on the outside allows your status value
-- and response headers to depend on the scarce resource.
--
-- Since 3.0.0
responseStream :: H.Status
               -> H.ResponseHeaders
               -> StreamingBody
               -> Response
responseStream :: Status -> ResponseHeaders -> StreamingBody -> Response
responseStream = Status -> ResponseHeaders -> StreamingBody -> Response
ResponseStream

-- | Create a response for a raw application. This is useful for \"upgrade\"
-- situations such as WebSockets, where an application requests for the server
-- to grant it raw network access.
--
-- This function requires a backup response to be provided, for the case where
-- the handler in question does not support such upgrading (e.g., CGI apps).
--
-- In the event that you read from the request body before returning a
-- @responseRaw@, behavior is undefined.
--
-- Since 2.1.0
responseRaw :: (IO B.ByteString -> (B.ByteString -> IO ()) -> IO ())
            -> Response
            -> Response
responseRaw :: (IO ByteString -> (ByteString -> IO ()) -> IO ())
-> Response -> Response
responseRaw = (IO ByteString -> (ByteString -> IO ()) -> IO ())
-> Response -> Response
ResponseRaw

----------------------------------------------------------------

-- | Accessing 'H.Status' in 'Response'.
responseStatus :: Response -> H.Status
responseStatus :: Response -> Status
responseStatus (ResponseFile    Status
s ResponseHeaders
_ FilePath
_ Maybe FilePart
_) = Status
s
responseStatus (ResponseBuilder Status
s ResponseHeaders
_ Builder
_  ) = Status
s
responseStatus (ResponseStream  Status
s ResponseHeaders
_ StreamingBody
_  ) = Status
s
responseStatus (ResponseRaw IO ByteString -> (ByteString -> IO ()) -> IO ()
_ Response
res      ) = Response -> Status
responseStatus Response
res

-- | Accessing 'H.ResponseHeaders' in 'Response'.
responseHeaders :: Response -> H.ResponseHeaders
responseHeaders :: Response -> ResponseHeaders
responseHeaders (ResponseFile    Status
_ ResponseHeaders
hs FilePath
_ Maybe FilePart
_) = ResponseHeaders
hs
responseHeaders (ResponseBuilder Status
_ ResponseHeaders
hs Builder
_  ) = ResponseHeaders
hs
responseHeaders (ResponseStream  Status
_ ResponseHeaders
hs StreamingBody
_  ) = ResponseHeaders
hs
responseHeaders (ResponseRaw IO ByteString -> (ByteString -> IO ()) -> IO ()
_ Response
res)        = Response -> ResponseHeaders
responseHeaders Response
res

-- | Converting the body information in 'Response' to a 'StreamingBody'.
responseToStream :: Response
                 -> ( H.Status
                    , H.ResponseHeaders
                    , (StreamingBody -> IO a) -> IO a
                    )
responseToStream :: forall a.
Response
-> (Status, ResponseHeaders, (StreamingBody -> IO a) -> IO a)
responseToStream (ResponseStream Status
s ResponseHeaders
h StreamingBody
b) = (Status
s, ResponseHeaders
h, ((StreamingBody -> IO a) -> StreamingBody -> IO a
forall a b. (a -> b) -> a -> b
$ StreamingBody
b))
responseToStream (ResponseFile Status
s ResponseHeaders
h FilePath
fp (Just FilePart
part)) =
    ( Status
s
    , ResponseHeaders
h
    , \StreamingBody -> IO a
withBody -> FilePath -> IOMode -> (Handle -> IO a) -> IO a
forall r. FilePath -> IOMode -> (Handle -> IO r) -> IO r
IO.withBinaryFile FilePath
fp IOMode
IO.ReadMode ((Handle -> IO a) -> IO a) -> (Handle -> IO a) -> IO a
forall a b. (a -> b) -> a -> b
$ \Handle
handle -> StreamingBody -> IO a
withBody (StreamingBody -> IO a) -> StreamingBody -> IO a
forall a b. (a -> b) -> a -> b
$ \Builder -> IO ()
sendChunk IO ()
_flush -> do
        Handle -> SeekMode -> Integer -> IO ()
IO.hSeek Handle
handle SeekMode
IO.AbsoluteSeek (Integer -> IO ()) -> Integer -> IO ()
forall a b. (a -> b) -> a -> b
$ FilePart -> Integer
filePartOffset FilePart
part
        let loop :: Int -> IO ()
loop Int
remaining | Int
remaining Int -> Int -> Bool
forall a. Ord a => a -> a -> Bool
<= Int
0 = () -> IO ()
forall a. a -> IO a
forall (m :: * -> *) a. Monad m => a -> m a
return ()
            loop Int
remaining = do
                ByteString
bs <- Handle -> Int -> IO ByteString
B.hGetSome Handle
handle Int
defaultChunkSize
                Bool -> IO () -> IO ()
forall (f :: * -> *). Applicative f => Bool -> f () -> f ()
unless (ByteString -> Bool
B.null ByteString
bs) (IO () -> IO ()) -> IO () -> IO ()
forall a b. (a -> b) -> a -> b
$ do
                    let x :: ByteString
x = Int -> ByteString -> ByteString
B.take Int
remaining ByteString
bs
                    Builder -> IO ()
sendChunk (Builder -> IO ()) -> Builder -> IO ()
forall a b. (a -> b) -> a -> b
$ ByteString -> Builder
byteString ByteString
x
                    Int -> IO ()
loop (Int -> IO ()) -> Int -> IO ()
forall a b. (a -> b) -> a -> b
$ Int
remaining Int -> Int -> Int
forall a. Num a => a -> a -> a
- ByteString -> Int
B.length ByteString
x
        Int -> IO ()
loop (Int -> IO ()) -> Int -> IO ()
forall a b. (a -> b) -> a -> b
$ Integer -> Int
forall a b. (Integral a, Num b) => a -> b
fromIntegral (Integer -> Int) -> Integer -> Int
forall a b. (a -> b) -> a -> b
$ FilePart -> Integer
filePartByteCount FilePart
part
    )
responseToStream (ResponseFile Status
s ResponseHeaders
h FilePath
fp Maybe FilePart
Nothing) =
    ( Status
s
    , ResponseHeaders
h
    , \StreamingBody -> IO a
withBody -> FilePath -> IOMode -> (Handle -> IO a) -> IO a
forall r. FilePath -> IOMode -> (Handle -> IO r) -> IO r
IO.withBinaryFile FilePath
fp IOMode
IO.ReadMode ((Handle -> IO a) -> IO a) -> (Handle -> IO a) -> IO a
forall a b. (a -> b) -> a -> b
$ \Handle
handle ->
       StreamingBody -> IO a
withBody (StreamingBody -> IO a) -> StreamingBody -> IO a
forall a b. (a -> b) -> a -> b
$ \Builder -> IO ()
sendChunk IO ()
_flush -> (IO () -> IO ()) -> IO ()
forall a. (a -> a) -> a
fix ((IO () -> IO ()) -> IO ()) -> (IO () -> IO ()) -> IO ()
forall a b. (a -> b) -> a -> b
$ \IO ()
loop -> do
            ByteString
bs <- Handle -> Int -> IO ByteString
B.hGetSome Handle
handle Int
defaultChunkSize
            Bool -> IO () -> IO ()
forall (f :: * -> *). Applicative f => Bool -> f () -> f ()
unless (ByteString -> Bool
B.null ByteString
bs) (IO () -> IO ()) -> IO () -> IO ()
forall a b. (a -> b) -> a -> b
$ do
                Builder -> IO ()
sendChunk (Builder -> IO ()) -> Builder -> IO ()
forall a b. (a -> b) -> a -> b
$ ByteString -> Builder
byteString ByteString
bs
                IO ()
loop
    )
responseToStream (ResponseBuilder Status
s ResponseHeaders
h Builder
b) =
    (Status
s, ResponseHeaders
h, \StreamingBody -> IO a
withBody -> StreamingBody -> IO a
withBody (StreamingBody -> IO a) -> StreamingBody -> IO a
forall a b. (a -> b) -> a -> b
$ \Builder -> IO ()
sendChunk IO ()
_flush -> Builder -> IO ()
sendChunk Builder
b)
responseToStream (ResponseRaw IO ByteString -> (ByteString -> IO ()) -> IO ()
_ Response
res) = Response
-> (Status, ResponseHeaders, (StreamingBody -> IO a) -> IO a)
forall a.
Response
-> (Status, ResponseHeaders, (StreamingBody -> IO a) -> IO a)
responseToStream Response
res

-- | Apply the provided function to the response header list of the Response.
mapResponseHeaders :: (H.ResponseHeaders -> H.ResponseHeaders) -> Response -> Response
mapResponseHeaders :: (ResponseHeaders -> ResponseHeaders) -> Response -> Response
mapResponseHeaders ResponseHeaders -> ResponseHeaders
f (ResponseFile Status
s ResponseHeaders
h FilePath
b1 Maybe FilePart
b2) = Status -> ResponseHeaders -> FilePath -> Maybe FilePart -> Response
ResponseFile Status
s (ResponseHeaders -> ResponseHeaders
f ResponseHeaders
h) FilePath
b1 Maybe FilePart
b2
mapResponseHeaders ResponseHeaders -> ResponseHeaders
f (ResponseBuilder Status
s ResponseHeaders
h Builder
b) = Status -> ResponseHeaders -> Builder -> Response
ResponseBuilder Status
s (ResponseHeaders -> ResponseHeaders
f ResponseHeaders
h) Builder
b
mapResponseHeaders ResponseHeaders -> ResponseHeaders
f (ResponseStream Status
s ResponseHeaders
h StreamingBody
b) = Status -> ResponseHeaders -> StreamingBody -> Response
ResponseStream Status
s (ResponseHeaders -> ResponseHeaders
f ResponseHeaders
h) StreamingBody
b
mapResponseHeaders ResponseHeaders -> ResponseHeaders
_ r :: Response
r@(ResponseRaw IO ByteString -> (ByteString -> IO ()) -> IO ()
_ Response
_) = Response
r

-- | Apply the provided function to the response status of the Response.
mapResponseStatus :: (H.Status -> H.Status) -> Response -> Response
mapResponseStatus :: (Status -> Status) -> Response -> Response
mapResponseStatus Status -> Status
f (ResponseFile Status
s ResponseHeaders
h FilePath
b1 Maybe FilePart
b2) = Status -> ResponseHeaders -> FilePath -> Maybe FilePart -> Response
ResponseFile (Status -> Status
f Status
s) ResponseHeaders
h FilePath
b1 Maybe FilePart
b2
mapResponseStatus Status -> Status
f (ResponseBuilder Status
s ResponseHeaders
h Builder
b) = Status -> ResponseHeaders -> Builder -> Response
ResponseBuilder (Status -> Status
f Status
s) ResponseHeaders
h Builder
b
mapResponseStatus Status -> Status
f (ResponseStream Status
s ResponseHeaders
h StreamingBody
b) = Status -> ResponseHeaders -> StreamingBody -> Response
ResponseStream (Status -> Status
f Status
s) ResponseHeaders
h StreamingBody
b
mapResponseStatus Status -> Status
_ r :: Response
r@(ResponseRaw IO ByteString -> (ByteString -> IO ()) -> IO ()
_ Response
_) = Response
r

----------------------------------------------------------------

-- | The WAI application.
--
-- Note that, since WAI 3.0, this type is structured in continuation passing
-- style to allow for proper safe resource handling. This was handled in the
-- past via other means (e.g., @ResourceT@). As a demonstration:
--
-- @
-- app :: Application
-- app req respond = bracket_
--     (putStrLn \"Allocating scarce resource\")
--     (putStrLn \"Cleaning up\")
--     (respond $ responseLBS status200 [] \"Hello World\")
-- @
type Application = Request -> (Response -> IO ResponseReceived) -> IO ResponseReceived


-- | A default, blank request.
--
-- Since 2.0.0
defaultRequest :: Request
defaultRequest :: Request
defaultRequest = Request
    { requestMethod :: ByteString
requestMethod = ByteString
H.methodGet
    , httpVersion :: HttpVersion
httpVersion = HttpVersion
H.http10
    , rawPathInfo :: ByteString
rawPathInfo = ByteString
B.empty
    , rawQueryString :: ByteString
rawQueryString = ByteString
B.empty
    , requestHeaders :: ResponseHeaders
requestHeaders = []
    , isSecure :: Bool
isSecure = Bool
False
    , remoteHost :: SockAddr
remoteHost = PortNumber -> HostAddress -> SockAddr
SockAddrInet PortNumber
0 HostAddress
0
    , pathInfo :: [Text]
pathInfo = []
    , queryString :: Query
queryString = []
    , requestBody :: IO ByteString
requestBody = ByteString -> IO ByteString
forall a. a -> IO a
forall (m :: * -> *) a. Monad m => a -> m a
return ByteString
B.empty
    , vault :: Vault
vault = Vault
forall a. Monoid a => a
mempty
    , requestBodyLength :: RequestBodyLength
requestBodyLength = Word64 -> RequestBodyLength
KnownLength Word64
0
    , requestHeaderHost :: Maybe ByteString
requestHeaderHost = Maybe ByteString
forall a. Maybe a
Nothing
    , requestHeaderRange :: Maybe ByteString
requestHeaderRange = Maybe ByteString
forall a. Maybe a
Nothing
    , requestHeaderReferer :: Maybe ByteString
requestHeaderReferer = Maybe ByteString
forall a. Maybe a
Nothing
    , requestHeaderUserAgent :: Maybe ByteString
requestHeaderUserAgent = Maybe ByteString
forall a. Maybe a
Nothing
    }


-- | Middleware is a component that sits between the server and application. It
-- can do such tasks as GZIP encoding or response caching. What follows is the
-- general definition of middleware, though a middleware author should feel
-- free to modify this.
--
-- As an example of an alternate type for middleware, suppose you write a
-- function to load up session information. The session information is simply a
-- string map \[(String, String)\]. A logical type signature for this middleware
-- might be:
--
-- @ loadSession :: ([(String, String)] -> Application) -> Application @
--
-- Here, instead of taking a standard 'Application' as its first argument, the
-- middleware takes a function which consumes the session information as well.
type Middleware = Application -> Application


-- | apply a function that modifies a response as a 'Middleware'
modifyResponse :: (Response -> Response) -> Middleware
modifyResponse :: (Response -> Response) -> Middleware
modifyResponse Response -> Response
f Application
app Request
req Response -> IO ResponseReceived
respond = Application
app Request
req ((Response -> IO ResponseReceived) -> IO ResponseReceived)
-> (Response -> IO ResponseReceived) -> IO ResponseReceived
forall a b. (a -> b) -> a -> b
$ Response -> IO ResponseReceived
respond (Response -> IO ResponseReceived)
-> (Response -> Response) -> Response -> IO ResponseReceived
forall b c a. (b -> c) -> (a -> b) -> a -> c
. Response -> Response
f


-- | conditionally apply a 'Middleware'
ifRequest :: (Request -> Bool) -> Middleware -> Middleware
ifRequest :: (Request -> Bool) -> Middleware -> Middleware
ifRequest Request -> Bool
rpred Middleware
middle Application
app Request
req | Request -> Bool
rpred Request
req = Middleware
middle Application
app Request
req
                               | Bool
otherwise =        Application
app Request
req

-- $streamingRequestBodies
--
-- == Streaming Request Bodies
--
-- WAI is designed for streaming in request bodies, which allows you to process them incrementally.
-- You can stream in the request body using functions like 'getRequestBodyChunk',
-- the @wai-conduit@ package, or Yesod's @rawRequestBody@.
--
-- In the normal case, incremental processing is more efficient, since it
-- reduces maximum total memory usage.
-- In the worst case, it helps protect your server against denial-of-service (DOS) attacks, in which
-- an attacker sends huge request bodies to your server.
--
-- Consider these tips to avoid reading the entire request body into memory:
--
-- * Look for library functions that support incremental processing. Sometimes these will use streaming
-- libraries like @conduit@, @pipes@, or @streaming@.
-- * Any attoparsec parser supports streaming input. For an example of this, see the
-- "Data.Conduit.Attoparsec" module in @conduit-extra@.
-- * Consider streaming directly to a file on disk. For an example of this, see the
-- "Data.Conduit.Binary" module in @conduit-extra@.
-- * If you need to direct the request body to multiple destinations, you can stream to both those
-- destinations at the same time.
-- For example, if you wanted to run an HMAC on the request body as well as parse it into JSON,
-- you could use Conduit's @zipSinks@ to send the data to @cryptonite-conduit@'s 'sinkHMAC' and
-- @aeson@'s Attoparsec parser.
-- * If possible, avoid processing large data on your server at all.
-- For example, instead of uploading a file to your server and then to AWS S3,
-- you can have the browser upload directly to S3.
--
-- That said, sometimes it is convenient, or even necessary to read the whole request body into memory.
-- For these purposes, functions like 'strictRequestBody' or 'lazyRequestBody' can be used.
-- When this is the case, consider these strategies to mitigating potential DOS attacks:
--
-- * Set a limit on the request body size you allow.
-- If certain endpoints need larger bodies, whitelist just those endpoints for the large size.
-- Be especially cautious about endpoints that don't require authentication, since these are easier to DOS.
-- You can accomplish this with @wai-extra@'s @requestSizeLimitMiddleware@ or Yesod's @maximumContentLength@.
-- * Consider rate limiting not just on total requests, but also on total bytes sent in.
-- * Consider using services that allow you to identify and blacklist attackers.
-- * Minimize the amount of time the request body stays in memory.
-- * If you need to share request bodies across middleware and your application, you can do so using Wai's 'vault'.
-- If you do this, remove the request body from the vault as soon as possible.
--
-- Warning: Incremental processing will not always be sufficient to prevent a DOS attack.
-- For example, if an attacker sends you a JSON body with a 2MB long string inside,
-- even if you process the body incrementally, you'll still end up with a 2MB-sized 'Text'.
--
-- To mitigate this, employ some of the countermeasures listed above,
-- and try to reject such payloads as early as possible in your codebase.

-- | Get the request body as a lazy ByteString. However, do /not/ use any lazy
-- I\/O, instead reading the entire body into memory strictly.
--
-- Note: Since this function consumes the request body, future calls to it will return the empty string.
--
-- Since 3.0.1
strictRequestBody :: Request -> IO L.ByteString
strictRequestBody :: Request -> IO ByteString
strictRequestBody Request
req =
    (ByteString -> ByteString) -> IO ByteString
forall {c}. (ByteString -> c) -> IO c
loop ByteString -> ByteString
forall a. a -> a
id
  where
    loop :: (ByteString -> c) -> IO c
loop ByteString -> c
front = do
        ByteString
bs <- Request -> IO ByteString
getRequestBodyChunk Request
req
        if ByteString -> Bool
B.null ByteString
bs
            then c -> IO c
forall a. a -> IO a
forall (m :: * -> *) a. Monad m => a -> m a
return (c -> IO c) -> c -> IO c
forall a b. (a -> b) -> a -> b
$ ByteString -> c
front ByteString
LI.Empty
            else (ByteString -> c) -> IO c
loop (ByteString -> c
front (ByteString -> c) -> (ByteString -> ByteString) -> ByteString -> c
forall b c a. (b -> c) -> (a -> b) -> a -> c
. ByteString -> ByteString -> ByteString
LI.Chunk ByteString
bs)

-- | Synonym for 'strictRequestBody'.
-- This function name is meant to signal the non-idempotent nature of 'strictRequestBody'.
--
-- @since 3.2.3
consumeRequestBodyStrict :: Request -> IO L.ByteString
consumeRequestBodyStrict :: Request -> IO ByteString
consumeRequestBodyStrict = Request -> IO ByteString
strictRequestBody

-- | Get the request body as a lazy ByteString. This uses lazy I\/O under the
-- surface, and therefore all typical warnings regarding lazy I/O apply.
--
-- Note: Since this function consumes the request body, future calls to it will return the empty string.
--
-- Since 1.4.1
lazyRequestBody :: Request -> IO L.ByteString
lazyRequestBody :: Request -> IO ByteString
lazyRequestBody Request
req =
    IO ByteString
loop
  where
    loop :: IO ByteString
loop = IO ByteString -> IO ByteString
forall a. IO a -> IO a
unsafeInterleaveIO (IO ByteString -> IO ByteString) -> IO ByteString -> IO ByteString
forall a b. (a -> b) -> a -> b
$ do
        ByteString
bs <- Request -> IO ByteString
getRequestBodyChunk Request
req
        if ByteString -> Bool
B.null ByteString
bs
            then ByteString -> IO ByteString
forall a. a -> IO a
forall (m :: * -> *) a. Monad m => a -> m a
return ByteString
LI.Empty
            else do
                ByteString
bss <- IO ByteString
loop
                ByteString -> IO ByteString
forall a. a -> IO a
forall (m :: * -> *) a. Monad m => a -> m a
return (ByteString -> IO ByteString) -> ByteString -> IO ByteString
forall a b. (a -> b) -> a -> b
$ ByteString -> ByteString -> ByteString
LI.Chunk ByteString
bs ByteString
bss

-- | Synonym for 'lazyRequestBody'.
-- This function name is meant to signal the non-idempotent nature of 'lazyRequestBody'.
--
-- @since 3.2.3
consumeRequestBodyLazy :: Request -> IO L.ByteString
consumeRequestBodyLazy :: Request -> IO ByteString
consumeRequestBodyLazy = Request -> IO ByteString
lazyRequestBody